Detailed Product Description
The control panel ARTON-08F is designed for organization of centralized and autonomous protection of various objects against fire by the 24-hours control of the status up to 8 fire alarm loops.
The control panel ARTON-08F conforms to all the norms EN54-2:2003.
The control panel ARTON-08F controls and reflects with optical indicators alarm statuses (alarm loops): the standby mode, the verification of alarm loop (if AL is with verification), Fire, Short-circuit, Open-circuit, AL switched-off.
The device controls and reflects with optical indictors the following kinds of faults and statuses:
Short-circuit of output switches;
Open-circuit of output switches loads Light/Sound, Fire and Fault;
Absence of power voltage of output switches and AL;
Absence of alternating current mains 220 V;
Critical discharge or the absence of a storage battery;
Fault of a charger;
System error.
The protection against an unsanctioned access inside a case is provided in the device (opening or breaking of a cover). When opening a cover, a tamper button activates and the device passes to the Alarm mode.
The device is meant for the connection of 2- and 4-wire alarm loops. The connection both active and passive detectors is possible as well as the combined connection of detectors.
The device provides:
Automatic charging of a storage battery and the protection against its improper connection;
Protection of all the output switches against the short-circuit with automatic restoration of the initial status after the elimination of short-circuit;
Multilevel access to management functions.
With the help of a built-in keyboard it is possible to programme the following parameters and functions:
Survey and determination the type of alarm loop zone (with/without verification);
Fixation of the basic current of AL;
Setting of consumer rights for the management of AL;
Change of consumers and an engineers passwords;
Setting of an operational mode of a light-sound detector;
Setting of activation time of a light-sound detector;
Setting of a mode and programming of operation logics of additional output switches;
Reset to factory settings.
